R1200GS Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 8 Results
  1. Maintenance and Modifications
    Good day mates, by chance you know what measure is the nut of the oil pressure / temperature sensor, or the die that is used to remove it, is located near the oil gauge. My bike is r1200gs 2005 V. ZR22339 Thanks.
  2. General chatter
    Hey, I've owned many many bikes, from MT07 to Harley Davidson, and also a 750GS, which has been the best bike I've owned so far, it's like being on a 2 wheel train. I currently own a Vulcan S which is amazing, buuuut I'm "homesick" for adventure bikes. 1250GS are out of my budget, I've tried one...
  3. General chatter
    Hello all, I have a 2015 1200GS. I was away for a few days, and when I got back I took the bike out for a spin and wash. I noticed the wheels were resisting rolling forward. I thought it was just some rust in the brake disc so I rode for a bit, washed it and applied ACF150. The rust of the...
  4. General chatter
    Im bracing myself to buy my first 1200. My concern is this - is it better to buy an older bike (2005) with low mileage around ten thousand, or a newer bike (2008-9) with around 30,000? Will the improvements of the latter (abs resolution, general tweaks) balance the low mileage of the former...
  5. Maintenance and Modifications
    Hi all so a small dilemma what’s your take how to fix the issue of water pooling inside the swing arm and rusting the splines of the front spline and final drive spline I grease the rear spline every 10000 kilometers and drain the FD oil at the same time as preventative maintenance and every...
1-5 of 8 Results