R1200GS Forum banner

abs

  1. Brake bleed after ABS unit replacement

    Maintenance and Modifications
    Hi folks, (first post here so let me know if I'm doing this right). 2007 non-servo linked ABS. GS911 said ABS unit was bad, ModuleMasters rebuilt it. While waiting for rebuild, fluid leaked out of the lines, so there was air in the lines when I re-attached the brake lines to the ABS unit...
  2. ABS motor (again)

    Maintenance and Modifications
    Ok The ABS motor on my 2007 R1200GS is having problems again. Third time. I know what it is :) The brushes lose contact with the commutator. (either through dirt or sticking) Yes I have dismantled it twice before, cleaned it, and put it back together. Works fine for a few months then does it...
  3. ABS 2-CAN fault - Help please

    Maintenance and Modifications
    Good day all, I have a 2007 R1200GS The bike completed a 2-3000 mile trip in May 2015 with no issues. I parked the bike and only rode it it since once or twice on short hops. The bike is kept in doors and on a battery tender. The battery is a 3 year old Odyssey that reads 12.7 Vdc at rest...
  4. R1200GS ABS generation history

    General chatter
    Since the new model (2004), what are ABS evolution from 2004 until now in term of ABS system ? Thanks in advance
Top