R1200GS Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
587 Posts
Discussion Starter #1 (Edited)
Black Widow Motorcycle Ramp ****SOLD****

****SOLD****

****SOLD****


***Assembled but never used. Truck is too high for this ramp and my motorcycle****

Details:
Manufactured from high-strength, lightweight aluminum
1,500 lb. weight capacity
Measures 10' L x 38" W
Serrated rungs for maximum traction
Folds in half and breaks down into three pieces for easy transport and storage
Arched design for maximum engine and tailpipe clearance
Full-width lip and two safety straps to secure ramp to your vehicle

https://www.discountramps.com/motorcycle_ramps/p/MF-12038/

Pickup only, location 89406 (Fallon, NV) $300.00
 

Attachments

·
Registered
Joined
·
26 Posts
***Assembled but never used. Truck is too high for this ramp and my motorcycle****

Details:
Manufactured from high-strength, lightweight aluminum
1,500 lb. weight capacity
Measures 10' L x 38" W
Serrated rungs for maximum traction
Folds in half and breaks down into three pieces for easy transport and storage
Arched design for maximum engine and tailpipe clearance
Full-width lip and two safety straps to secure ramp to your vehicle

https://www.discountramps.com/motorcycle_ramps/p/MF-12038/

Pickup only, location 89406 (Fallon, NV) $300.00
I have one of these ramps and have used it many times to haul full size Harley and BMW touring bikes, among other smaller bikes, in the backs of trucks. Sure beats pulling a trailer! You said your truck is too high, but I think you can still use this ramp. I used these cheaters shown at the bottom of this Web site (http://www.moccsplace.com/images/trailer/truckin.htm) so I can still put both feet down while getting up on the ramp. They fill that gap as you roll the front wheel up the ramp until your back wheel reaches the bottom. I also try to park in places where the ground slopes enough to help reduce the height of the tailgate.
 

·
Registered
Joined
·
587 Posts
Discussion Starter #3
I have one of these ramps and have used it many times to haul full size Harley and BMW touring bikes, among other smaller bikes, in the backs of trucks. Sure beats pulling a trailer! You said your truck is too high, but I think you can still use this ramp. I used these cheaters shown at the bottom of this Web site (Truckin) so I can still put both feet down while getting up on the ramp. They fill that gap as you roll the front wheel up the ramp until your back wheel reaches the bottom. I also try to park in places where the ground slopes enough to help reduce the height of the tailgate.
Agree bike is better in the truck bed then in a trailer behind it.
Saw those cheaters and didn't care for it.
Bought a 12' ramp and it works great. Feet are on the ramp all the way up.
Works even better when I park the truck at a lower elevation, like in the street, and then the ramp end is in my driveway. Those extra inches lower make a huge difference.
Used it couple times already. Works great.
Someone is coming to look at the 10' ramp today and hopefully buying.
 
1 - 3 of 3 Posts
Top