R1200GS Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
132 Posts
Discussion Starter #1
I replaced OEM windshield with this because it provides much better wind protection. Unlike other windshields, the Cee Bailey’s is 5 mm thick. Almost no flexing at highway speeds. One of the attached pics shows comparison.

Very good condition. It has scuffs where the bike’s mounting brackets sit, but they cannot be seen when mounted. There’s a scuff about three inches from the top edge, near the center, very hard to see. Shipping from 07649 0D006E87-5E81-49BB-B58B-951DC42D4150.jpeg 3A3F808A-3B81-40BB-BED3-93345F828C90.jpeg 0FF501EE-9246-4F18-8168-E79B816331E1.jpeg B3102170-F27A-42FC-9C33-CA1D50B661D8.jpeg 9E3957D1-70ED-45EF-8F47-EE86775782F3.jpeg E40BFB56-26F1-4F55-BD0F-F98B7D9A1B90.jpeg
 

·
Registered
Joined
·
132 Posts
Discussion Starter #6
Is this still avaliable, is it the+5" version or +3".....very intrested....
AF573EE9-F005-41B7-B11D-CF187F3D099A.png

the CB measures 19.25” from top center to bottom center. I’m 6ft with a 32” inseam. With the CB windshield adjusted up, I had no helmet buffeting at highway speeds. I could ride with my face shield open. Hope this answers your question.
 
1 - 8 of 8 Posts
Top