R1200GS Forum banner
1 - 1 of 1 Posts

·
Registered
2006 R1200GS, 2007 R1200GS. 2005 R1200GS, 2009 R1200GS, 2009 R1200GSA, 2005 R1200GS, 2006 R1200GS, 2
Joined
·
2,009 Posts
The plunger will most likely unscrew once the 2m allen set screw is loosened and some heat applied to soften up any thread compound that may have been applied.

Also be warned that the plunger setting is a bit of a process. A minor adjustment (screwing in/out) can have a big effect on the brake engagement. point. They make them a PITA to remove/adjust the plunger for a reason. They don't want every swing dick futzing with the brakes.
 
  • Like
Reactions: mikec and Søren K
1 - 1 of 1 Posts
Top