[Math]

Here's a general and random quick reference list I've been compiling. I keep a three-ring binder with a folder for each bike so i can collects and catalog receipts and other information. I also have this, quick reference printed out and in a plastic sheet protector along with a full torque spec guide and the flush/bleed process for servo brakes. Keeps from searching the internet evetime you need information.


Hexhead R1200GS/A Quick Reference:

• Front tire pressure – 36 PSI
• Rear tire pressure – 40 PSI
• Rear wheel lug torque - 44 FT/LBS
• Front/Rear caliper mount bolts (M8 x 32) torque - 22 FT/LBS
• Front Axle torque - 37 FT/LBS
• Front axle pinch bolt torque – 14 FT/LBS
• Air filter – Mahle LX 984/2
• Oil filter – HiFlo #164
• Transmission oil – 800cc’s 75W-90 GL5 gear oil
• Rear drive oil – 180cc’s 75W-90 GL5 gear oil
• Engine oil – 4 liters (w/ filter change) 15W-50 or 20W-50
• Intake valve – 0.15mm cold
• Exhaust valve – 0.30mm cold
• Headlight bulb – H7 (both hi/lo beam)
• City light bulb – #168 12V/5W

Front wheel bearings and seals

• Left front wheel bearing – 6205 2RS
• Right front wheel bearing – 6205 2RS
• Left front wheel bearing seal 30 x 52 x 7 single lip
• Right front wheel bearing seal – 35 x 52 x 7 single lip

Just what i need before my trip many thanks