I have a 2009 with the ABS warning light on. Slammed on the brakes and the ABS is definately not kicking in. The 911GS says that the ABS pump is defective. I looked up the pump on the BMW website and it's over $2K. Could it just be an electrical problem. I'm about 4 hours away from the nearest "stealer" although I plan on getting there in the next couple of weeks. Is it just one pump for front and rear brakes? Any one else have any experience in the dept.
ABS not working
tanque@bmw
1 - 2 of 17 Posts
Joined
·
3 Posts
I have a 2013 are R1200 GS. The ABS light came on during my last road trip. When I got home I plugged in my GS911 and there was no error codes. I activated the pump using the 911 system and the pump turned on. Can the ABS pump be bad and still turn on. Or could it be a wheel sensor problem.
![28405]( "28405")
Joined
·
3 Posts
update. I was finally at my wits and with this ABS problem so I took the motorcycle down to Hap‘s Cyclery in Sarasota. I left it with them and they worked on it the next day. They hooked it up to their computer did a hard reset on the motorcycle, updated the software and turn the ABS on. There was actually nothing wrong with the ABS system it just would not turn on. Now the motorcycle is working perfect. I can’t say enough Haps BMW in Sarasota they’re honest in a great facility. I would highly recommend them.
1 - 2 of 17 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
