[Jaykera]

Hi everyone,

I don't have a Nav gps at the moment and I'd like to remove the stock mount to make room for my Tripy and phone x-brackets. I might put it back later though. Any advice from people who have done it ?

Ideally I would unplug the cable from the mount but It doesn't seem possible.

Thanks,

 

[JetSpeed]

Follow the wiring down the connector is on the right side of the right fork near the fork seal.
I take it that you will leave the control wheel in the left handgrip in place.

 

[Jaykera]

I'll check that tonight, thanks !